A Comprehensive Guide on Leather Repair in Melbourne

Are you facing an unsightly tear in your leather seats? It is recommended to never ignore this as it can just keep on increasing, damaging the look and aesthetics of your car as a whole. So, if you are planning to opt for DIY without considering for the professional leather repair in Melbourne, you are at the right place.

This blog covers everything that you need to know about leather car seat repair.

#1 Inspect Damage and Clean it

The first and the foremost thing to do is to assess what exactly you are working with. What size is the tear and is it the leather on the top or vinyl on the side? Figuring out the problem will help you gather the necessary tools. So, once you assess the damage, be sure to thoroughly clean the area. Be sure to remove the silicone products. Use a soft scrubbing pad and a light soap to clean the damaged part.

#2 Start Patching

Mark the area where you will do the repair. Apply the patch material as the instructions state. You will need to apply a few thin layers. It is recommended to use a palette knife for the application. 

#3 Cure, Add Material and Dry

In order to cure the patching material you added for the leather repair in Melbourne, use a heat gun. Once done, use a textured piece of plastic to press into the patch area so it matches the texture of the rest of the seat. Here, you will find textures ranging from smooth to grainy pebbles. So, once you create some texture, you must let the area dry.

#4 Use a Filler

Is your leather car seat repair including a seam? If yes, you will need to fill the area with an adhesive. Once you cover the area and let it dry, you can further sand it down in order to match the surrounding areas. 

#5 Prep for Colour

Once you have the damage repairs, you will need to blend it in a way that no one is able to figure out that there was originally a tear. Clean the area again so that the colour you add adheres properly. The next step involves colour matching. You can mix the different tints into a spray gun. Here you can consult a shop to assist you with the colour options. It is the most difficult part so make sure you get it done right the very first time. 

#6 Condition

Once the colour dries up completely, add an upholstery conditioner. The conditioner will keep the leather clean which reduces the chances of future cracks and wear.